ACS Series

Stationary Compactor

Galfab’s stationary compactors are ideal for dry waste applications often found in distribution centers, office complexes, malls, department stores, and discount stores. These compactors are ideal to cost-effectively reduce waste to a fraction of its original size and maximize payload.

Item ACS200 ACS200HD ACS300 ACS300HD
Overall Height 48″ 48″ 48″ 48″
Overall Width 74″ 74″ 74″ 74″
Overall Length 120″ 120″ 180″ 180″
Charge Box Width 60″ 60″ 60″ 60″
Charge Box Length 44.5″ 44.5″ 70.5″ 70.5″
Discharge Height 34″ 34″ 34″ 34″
Ground Height 14″ 14″ 14″ 14″
Charge Box Capacity (Yards) 1.90 1.90 2.90 2.90
Clear Top Opening (LxW) 44.5″ x 58″ 44.5″ x 58″ 67.5″ x 58″ 67.5″ x 58″
Cycle Time (sec) 69 60 68 60
Normal Force (lbs) 52,307 60,789 52,307 60,789
Maximum Force (lbs) 60,789 67,858 60,789 67,858
Ram Penetration (in) 14″ 14″ 12″ 12″
Motor (HP) 10 10 15 15
Control Voltage (VAC) 110 110 110 110
Panel Box NEMA 4 NEMA 4 NEMA 4 NEMA 4
Standard Controls Start/Stop/Reverse Start/Stop/Reverse Start/Stop/Reverse Start/Stop/Reverse
Power Unit Ul Listed Yes Yes Yes Yes
Pump (GPM) 10.5 10.5 10.5 10.5
Normal Pressure (PSI) 1850 2150 1850 2150
Maximum Pressure (PSI) 2150 2400 2150 2400
Cylinder (in) 6×2.5 6×4 6×3 6×4
Weight (lbs) 4550 4870 6000 6310
Pricing Build Quote Build Quote Build Quote Build Quote
  • Multi-Cycle Time
  • Sonaizaire Door Control System
  • Oil Heater
  • Low Oil Shut Down
  • AR 400 Floor
  • Overall Run Time
  • Low Temp Oil
  • Breaker Bar Teeth
  • Remote Control
  • Biometric Access Control
  • Guide Rails
  • 24 Volt Control
  • Steel Options-Open Hopper, Walk Up, Walk On, Chute Feed, Cart Tipper, Total Enclosures