NIO Series

HD Inside/Outside Rail Hoist

Our Heavy Duty Inside/Outside Rail Hoist has the versatility to pick up inside and outside rail containers. The IO Hoist comes standard with inside rollers. This hoist has a Cor-Ten divider rail and inside rollers for the inside rail containers.

Standard Features

  • 10″ x 4″ x 1/2″ Main Frame Tube
  • 3″ x 3″ x 1/2″ Cor Ten Top Divider Angle
  • 1/2” x 4 inch Stiffener on the Bottom of the Main Frame
  • No Sub Frame
  • All Working Points Greaseable
  • 2 1/2″ Diameter Rear Hinge
  • Pintle Ready Apron
  • Auto Fold Forward DOT Bumper
  • 1″ Spring Loaded Container Locks
  • 2 1/2″ Diameter Lift Cylinder Shafts
  • 12″ Diameter Vertical Sheave and 10″ Horizontal Sheaves
  • 3/8 inch x 3 inch Winch Cylinder Rod Covers
  • 6 Inboard and Outboard Supported Outside Rollers
  • Container Long Sill Supports on Rear of Hoist Mainframe
  • Cor Ten Divider
  • 48 Gallon Oil Reservoir with Sight and Temperature Gauge
  • 25 Micron Filtration
  • Inside and Outside Controls
  • Choice of Forward or Reverse Mount Single Stage or Telescopic Lift Cylinders
  • LED Lighting System
  • 7/8” Cable with Heavy Duty Swivel Eye Hook
  • 4 Inside Rollers
  • Front Mount Pump
  • Hoist Up Warning Light
  • Sealed Wiring System
  • Hoist Up Alarm
  • Backup Alarm

Optional Features

  • “The Hooker” Hold On System
  • Auxiliary Stops
  • Work Lights
  • Behind Cab and Oversize Oil Tanks
  • Tool Boxes
  • Poly or Steel Fenders
  • Aluminum Fenders
  • Tarping Systems
  • Ratchet Tie Down Straps
  • Pintle Hook
  • Front Mount Pump
  • PTO
  • Drop Shaft
  • On-Board Scale Systems
  • Rear View Camera Systems
  • Integrated hydraulics can be used, if hydraulic tarping system is used
Model Capacity CA CA with tarp Length Dump Angle Up (sec)* Down (sec)* On (sec)* Off (sec)* Lift Cylinder Winch Cylinder Container Length ft Apx Weight lbs Pricing
NIO60174S072 60,000 174″ 186″ 23’3″ 48° 27 15 41 28 6″ x 4″ x 72″ DA 7″ x 4″ x 79.5″ DA 18′-22′ 7550 Build Quote
NIO60174S072R 60,000 174″ 186″ 23’3″ 48° 27 15 41 28 6″ x 4″ x 72″ DA 7″ x 4″ x 79.5″ DA 18′-22′ 7550 Build Quote
NIO60174T121 60,000 174″ 186″ 23’3″ 48° 35 29 41 28 6″-5″-4″ x 121″ DAT 7″ x 4″ x 79.5″ DA 18′-22′ 7225 Build Quote
NIO75174S072F7 75,000 174″ 186″ 23’3″ 48° 37 23 41 28 7″ x 4″ x 72″ DA 7″ x 4″ x 79.5″ DA 18′-22′ 7550 Build Quote
NIO75174S072R7 75,000 174″ 186″ 23’3″ 48° 37 23 41 28 7″ x 4″ x 72″ DA 7″ x 4″ x 79.5″ DA 18′-22′ 7550 Build Quote
NIO75174T121 75,000 174″ 186″ 23’3″ 48° 35 29 41 28 6″-5″-4″ x 121″ DAT 7″ x 4″ x 79.5″ DA 18′-22′ 7350 Build Quote
NIO60194S072 60,000 194″ 206″ 24’11” 48° 27 15 46 31 6″ x 4″ x 72″ DA 7″ x 4″ x 89.5″ DA 20′-24′ 7850 Build Quote
NIO60194S072R 60,000 194″ 206″ 24’11” 48° 27 15 46 31 6″ x 4″ x 72″ DA 7″ x 4″ x 89.5″ DA 20′-24′ 7850 Build Quote
NIO60194T121 60,000 194″ 206″ 24’11” 48° 35 29 46 31 6″-5″-4″ x 121″ DAT 7″ x 4″ x 89.5″ DA 20′-24′ 8075 Build Quote
NIO75194S072F7 75,000 194″ 206″ 24’11” 48° 37 23 46 31 7″ x 4″ x 72″ DA 7″ x 4″ x 89.5″ DA 20′-24′ 7850 Build Quote
NIO75194S072R7 75,000 194″ 206″ 24’11” 48° 37 23 46 31 7″ x 4″ x 72″ DA 7″ x 4″ x 89.5″ DA 20′-24′ 7850 Build Quote
NIO75194T121 75,000 194″ 206″ 24’11” 48° 35 29 46 31 6″-5″-4″ x 121″ DAT 7″ x 4″ x 89.5″ DA 20′-24′ 8075 Build Quote

* Cycle Times are Factory developed and controlled by PTO output, oil viscosity, human and mechanical efficiency, and may vary accordingly.

CAUTION: This Equipment Should be Operated by Properly Trained Personnel. Improper Use, Misuse, or Lack of Maintenance Could Cause Injury to Persons or Property. Photos used in this brochure are illustrative only. We reserve the right to make changes at any time without notice. Information contained within this literature is believed to be the most accurate available at the time of printing.

The Galfab Advantage

Inside/Outside Supported Rollers Inside/Outside Supported Rollers Greasable Roller shaft is removable with two bolts for ease of replacement and maintenance. Two Inside rollers on each side have a common shaft with outside rollers.
Wear Strips Wear Strips Wear strips add strength to the hoist mainframe and this extra layer of steel protects the mainframe from wear and scarfing when loading and unloading containers.
Autofold DOT Bumper Autofold DOT Bumper Bumper folds forward reducing the chance of bending and hang-ups in the landfill.