Galfab’s Gasketed Tailgate Containers are great for application with liquid and environmental concerns. Continuously welded sides reduce the chances of leaks making this container for hazards and mess associated with wet waste. These containers are available in a variety of strengths and options to fit almost any payload or application.
Standard Features
- Single Rear Door
- Articulating Hinge with Gasket
- 3” Channel Cross Members
- Cross Member Gusseted
- Solid Steel Nose Cone
- Greaseable Rear Rollers
- 84” Inside Width
- Interior Gussets
- Heavy Duty Top Caps
- All Wear Points Greaseable
- Standard Paint Colors
Optional Features
- Front Rollers
- 3/8” Long Sills
- Dirt Shedders
- Inverted Angles on Top Cap
- Heavy Duty Top Cap
- Roll Tarp Covers
Model OS | Rated Cubic YD. | Pricing |
---|---|---|
OS1660 | 20 Cu. Yd. | Build Quote |
OS1836 | 13 Cu. Yd. | Build Quote |
OS1854 | 20 Cu. Yd. | Build Quote |
OS1866 | 25 Cu. Yd. | Build Quote |
OS1872 | 27 Cu. Yd. | Build Quote |
OS2048 | 20 Cu. Yd. | Build Quote |
OS2060 | 25 Cu. Yd. | Build Quote |
OS2072 | 30 Cu. Yd. | Build Quote |
OS2242 | 20 Cu. Yd. | Build Quote |
OS2254 | 25 Cu. Yd. | Build Quote |
OS2266 | 31 Cu. Yd. | Build Quote |
OS2284 | 40 Cu. Yd. | Build Quote |
OS2442 | 21 Cu. Yd. | Build Quote |
OS2448 | 24 Cu. Yd. | Build Quote |
OS2460 | 30 Cu. Yd. | Build Quote |
A | B | C | D | E | F | |
---|---|---|---|---|---|---|
Typical Applications | Used for non dense type material with little to no liquid where leaks are not desired. | Used for small amount of liquids that can separate from the material and no leakage desired. | Used for material where part of the liquids remain suspended and part of the liquids separate from the material and no leakage is desired. | Used for material where the liquid mostly stays suspended in the material. | Used for thick liquid suspended material that has some moving or hydraulic action. | Used for thinner liquid material that would flow or move easily. |
Side | 12 gauge | 12 gauge | 7 gauge | 7 gauge | 7 gauge | 7 gauge |
Floor | 7 gauge | 7 gauge | 1/4″ | 1/4″ | 1/4″ | 1/4″ |
Stake Spacing | 30″ | 30″ | 30″ | 24″ | 30″ | 24″ |
Interior Gussets | No | Yes | Yes | Yes | Yes | Yes |
Air Test Gussets | N/A | Yes | Yes | Yes | Yes | Yes |
Continuous Weld – Sides | Inside | Inside & Outside | Inside & Outside | Inside & Outside | Inside & Outside | Inside & Outside |
Continuous Weld – Stakes | No | No | No | No | Yes | Yes |
Braced Tailgate | No | Yes | Yes | Yes | Yes | Yes |
Cross Sill Spacing | 16 | 16 | 12 | 12 | 12 | 12 |
Galfab Features


