HH Series

Dead Lift Hoist

The Galfab Dead Lift cable hoist utilizes the two rear flange rollers as well as a center cable roller to pull the container straight up and winch onto the hoist frame. This hoist is best utilized in tight spaces and is also available in an extendable tail option (EH Series).

Standard Features

  • 8″ x 4 x 1/2″ Main Frame Tube
  • 3″ x 2″ x 1/4″ Sub Frame
  • 2 1/2″ Diameter Rear Hinge
  • All Working Points Greaseable
  • Pintle Ready Apron
  • 1″ Spring Loaded Container Locks
  • 2 1/2″ Diameter Lift Cylinder Shafts
  • Interchangeable 10″ Vertical and Horizontal Sheaves
  • 3/8 inch x 3 inch Winch Cylinder Rod Covers
  • 6 Inboard and Outboard Supported Outside Rollers
  • Container Long Sill Supports on Rear of Hoist Mainframe
  • Heavy Duty Rear Guide Rollers
  • 48 Gallon Oil Reservoir with sight and Temperature Gauge
  • 25 Micron Filtration
  • Inside and Outside Controls
  • LED Lighting System
  • Choice of Forward or Reverse Mount Single Stage or Telescopic Lift Cylinders
  • 7/8” Cable with Deadlift Knuckle Hook Link
  • Front Mount Pump
  • Hoist Up Warning Light
  • Sealed Wiring System
  • Hoist Up Alarm
  • Backup Alarm

Optional Features

  • Behind Cab and Oversize Oil Tanks
  • Tool Boxes
  • Auxiliary Stops
  • Poly or Steel Fenders
  • Aluminum Fenders
  • Tarping Systems
  • Hooker Hold On Systems
  • Ratchet Tie Down Straps
  • PTO
  • Rear View Camera Systems
  • Work Lights
  • Onboard Scale Systems
  • Drop Shaft
  • Integrated hydraulics can be used, if hydraulic tarping system is used
Models/Build Quote
Model Rated Capacity CT Length Dump Angle Up (sec)* Down (sec)* On (sec)* Off (sec)* Lift Cylinder Winch Cylinder Container Length Apx Weight lbs Pricing
HH50174S072 50,000 174″ 19′ 47 30 13 46 37 6″ – 4 1/2″ X 74 1/2″ 7″ – 3″ X 81 1/2″ 18′ TO 20′ 7500 Build Quote
HH50174T121 50,000 194″ 19′ 47 43 10 46 37 6″ – 5 – 4″ X 121″ 7″ – 3″ X 81 1/2″ 18′ TO 20′ 8300 Build Quote
HH50194T121 50,000 194″ 20′ – 8′ 47 43 10 46 37 6″ – 5 – 4″ X 121″ 7″ – 3″ X 91 1/2″ 20′ TO 24′ 8500 Build Quote

* Cycle Times are Factory developed and controlled by PTO output, oil viscosity, human and mechanical efficiency, and may vary accordingly.

CAUTION: This Equipment Should be Operated by Properly Trained Personnel. Improper Use, Misuse, or Lack of Maintenance Could Cause Injury to Persons or Property. Photos used in this brochure are illustrative only. We reserve the right to make changes at any time without notice. Information contained within this literature is believed to be the most accurate available at the time of printing.

The Galfab Advantage

Outboard Supported Side Rollers Outboard Supported Side Rollers Greasable roller shaft is removable with two bolts.
Lift Cylinder Lift Cylinder Two lift cylinders utilize a 2 ½" shaft.
Heavy Duty Rear Rollers Heavy Duty Rear Rollers Rollers increase the life of your hoist and gives you added support to the long sills of your container.
Front Stop Front Stop Durable stops made with heavy duty 1-½” plate steel.